On a phone version of the RadBeacon app, you'll pull to refresh. On Mac, you'll click the Start Scanning button. Once the app is running, plug in your hardware Beacon so it has power. Open the RadBeacon app (either iOS, Android, or Mac). Step 3: Find the hardware inside the RadBeacon app The UUID listed will be the one we'll use to program the hardware. The following screen will be present, where you'll need to give your new Beacon a name and click Create Beacon. If you do not yet have a Beacon, you'll click the Add Beacon button to create one. Then, copy the UUID, which is what we'll use to program. ![]() If you already have a Beacon that you wish to use to program your hardware, click the name of the Beacon on this screen to view the details. Here is a list of all the Beacons that Simple In/Out knows about for your organization. Click Settings in the upper-right, followed by Beacons on the left. ![]() Head to and log in with your email/password. If you already have the UUID you want program into your Beacon, you can skip this step. All RadBeacon USB hardware have a 30 minute lockout that prevents tampering and will make them unavailable until powered off and back on. This is to avoid reprogramming the wrong Beacon. Unplug any Beacons that may be in range of your device used to reprogram. Places to download: Windows, Mac, iOS, Android. To reprogram a hardware Beacon you will need the free RadBeacon app from Radius Networks. You will also need to be an administrator of Simple In/Out in order to view your Beacons and unique identifiers (UUID), which are required for programming. If you need to purchase Beacon hardware, check out our Beacon Hardware Purchasing Guide. While these steps are specific for this vendor, there are likely similar steps for other hardware Beacon vendors. In order to re-enter normal operational model, simply remove and replace power to the device.This article will assist you with programming a RadBeacon USB for Simple In/Out. Reboot the beacon into Direct Firmware Update mode.Ĭontact Radius Networks support for information on the procedure for firmware update or replacement. Press the Action Menu button and select DFU. In order to re-enter configurable mode for a RadBeacon X2, remove the front cover and switch the beacon power switch to OFF and back to ON.Ī beacon set in configurable mode will be configurable for up to 30 minutes or until you lock the device again. In order to re-enter configurable mode for a RadBeacon Tag, remove the front cover and press the configuration push button switch near the coin cell battery. In order to re-enter configurable mode for a RadBeacon USB, remove and restore power to the device. The Lock feature is a security precaution to limit the possibility of third party manipulation of your beacons once they have been installed and configured. Submit a valid PIN to prevent connections from remote Bluetooth 4.0 devices to the beacon configuration service. Press the Action Menu button and select Lock. Submit a valid PIN to reset the settings for your beacon to factory defaults. ![]() Reset the device to the original factory settings. Press the Action Menu button and select Reset. Submit a new and existing PIN to update the PIN for your beacon. Press the Action Menu button and select Update PIN. Validate the accuracy of your beacon settings by quickly verifying the ranging behavior of your device in proximity to your configured beacon. Press the Action Menu button and select Range. Update the measured power value with the results of your calibration activity and update your settings. ![]() Press the Action Menu button and select Calibrate.Ĭalibrate the measured power value of the beacon settings to ensure optimal proximity events and ranging. Submit a valid PIN to update the settings for this beacon. Press the Action Menu button and select Apply. Select any RadBeacon in the table to view it's detailed settings. Each beacon discovered is displayed with the following summary details Scan for nearby configurable RadBeacons by swiping down on the RadBeacons table. Once discovered, you can display each beacon's operating settings and make modifications to those settings. With the RadBeacon app you can scan for nearby configurable Radius Networks beacons. The RadBeacon app from Radius Networks requires an iOS iPhone, iPad or iPod touch running iOS 7.1 or higher and equipped with Bluetooth 4.0 capabilities. The RadBeacon™ app is the configuration utility for RadBeacon proximity beacons from Radius Networks that support Apple's iBeacon™ proximity services as well as other emerging proximity services.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |